LaserLyte® Returns to Basics with a very affordable rear sight laser for the Springfield XD/XD pistols.
As many know, laser sights can be very beneficial; but there is one major flaw… ordinary red lasers can be next to impossible to see in most daylight conditions. The benefit of a green laser is that it is much more visible, allowing for it to be used anytime, day or night, indoors or outdoors, permitting you to track your target quicker and more accurately. Additionally, because green lasers are so much more visible to the human eye, you can actually see a very intimidating visible beam in low-light conditions.
The Difference is Clear
During the Day
Which is more visible to you? On the left we see a traditional red laser sight, compared to the green Viridian in broad daylight. The lasers were at a distance of 25 feet from the wall.
On the left you can see how visible the beam can actually get during dark or dimmer conditions.
Overcast, In the woods
Shown to the left is an additional day shot, which again shows the dramatic difference.
Why Green Lasers are More Visible
Green is closer to the center of the visible spectrum, at 532 Nanometers, so it’s easier for our eyes to perceive the color vs. a red laser at 635 Nanometers. In fact, a green laser can appear as much as 50 times brighter than the red equivalent and as can be seen from the below charts 532 nm is the ideal wavelength to maximize visibility during day or night.
In Daytime Conditions the human eye has maximum sensitivity
at the 555 nm wavelength
In Nighttime Conditions the human eye has maximum sensitivity
of 512 nm wavelength
The little (and I do mean little, it weighs practically nothing) laser can be easily mounted on pretty much any rail, making it perfect for those who can’t get Laser Grips for their pistol or those who don’t want the bulk of the grips or the weight of a Laser Guard. For me? I think it would be awesome on a rifle rail.
The one down side of opting for something like the Rail Master over regular Crimson Trace Laser Grips is that the Rail Master is activated by a switch rather than the instinctive activation most of Crimson Trace’s products utilize. The switch is easy enough to use and fully ambidextrous; there’s a paddle on either side of the Rail Master that is pressed to turn the laser on, but it’s one more thing to think about in a high-stress situation. On the other hand, something Caleb pointed out, there are no light “NDs”, although in my mind if I’m drawing my gun I’m going to be shouting and trying to do anything I can to illuminate the area and a little bit of laser really isn’t going to hurt me any. I guess it depends on how tactical you are.
The Rail Master has over four hours of battery life, comes sighted from the factory at 50′ and weighs next to nothing. It fits a pistol, rifle or shotgun with a M1913 Picatinny or Weaver accessory rail. That means 1911s with rails, most 3rd Gen Glocks, 4th Gen Glock 17s and 19s, HK P30s, M&Ps, Sig P220, P226, P229, the Ruger SR series, Springfield XDs and XDMs and pretty much any other rail-equipped pistol.
Light, easy to use and can be mounted on just about anything. I need a minimum of 4.
For Sale: $296.08 LASERMAX Rail Mount Laser, Picatinny / Weaver-Style Rails, Green (LMS-UNI-G) LAS-LMS-UNI-G previously returned.
To purchase call 800-851-9329 or email firstname.lastname@example.org.
The side lasers are easy to mount on the gun by simply pushing out and replacing the stock frame pins with the new threaded pins (included). Mount the CK-AMF9ZK or CK-AMFZK to these pins with the included screw. Then push the ergonomic activation button with the index finger and the laser is on target. The programmable laser features a pulse or constant on mode and also has an auto-off function to prevent an unwanted battery drain. An added benefit is that the laser actually helps to provide safer trigger control by acting as a finger guide without blocking the laser beam. The smooth, no-snag design of the laser allows the pistol to easily holster in any available nylon or leatherpocket holster on the market.
Compact, lightweight and easy-to-use, the LaserLyte® CK-AMF9ZK and CK-AMFZK give you the edge in close quarter Zombie situations for only $99.95, a price far lower than the competition, but far superior in quality.
LaserLyte® Introduces One Side Mount Laser that Fits All Taurus Revolvers and all S&W J-Frames; the LaserLyte® CK-SWAT
The side mounted laser fits on all of the Smith & Wesson J-frame revolvers ever made and all Taurus revolvers. And now, the Taurus Judges including the Public Defender finally has a laser system to call its own with the CK-SWAT laser.
The new LaserLyte® CK-SWAT laser mounts easily underneath the grip and is the only laser system available that allows the customer to retain the factory grip and comfortably and easily holster the firearm. The CK-SWAT is also compatible with many aftermarket grips including Hogue® and Pachmayr®.
To install the LaserLyte® CK-SWAT, simply choose one of the four included base plates that fit the revolver, remove the grip and screw the unit into place. Replace the grip and sight in the firearm with common X and Y adjustments. When ready to activate, simply press the button located at the back of the laser as you draw the firearm from the holster. The laser is easily programmable to either constant on or pulse mode.
Another great feature is the “auto-off” feature that displays a unique flash after 5-minutes of operation and automatically turns the unit off after 6-minutes. This feature can be reset at anytime to prevent accidental activation and battery depletion. The LaserLyte® CK-SWAT unit can also be easily removed and placed on any other compatible firearms.
INTRODUCING RAIL MASTER™
How do you enhance a rail-equipped firearm? Lock a Crimson Trace laser sight right up front. The Rail Master™ is here, and once you lock it on, it will not move, thanks to advanced Secure-Lock Technology™. If your handgun frame has a rail, we’ve got it’s Rail Master. Laser activation is instant. You just tap on, and tap off. We expect big things from the Rail Master. So should you.
The Rail Master fits most M1913/Picatinny and Weaver style accessory rails on pistols, rifles and shotguns from brands including: Bersa, Beretta, FN, GLOCK, Heckler & Koch (HK), Ruger, Sig Sauer, Smith & Wesson, Springfield Armory, Taurus and Walther. The rail-master also will fit a myriad of rail-equipped rifles and shotguns from many manufacturers.
Rail Master™ AVAILABLE IN THE FOLLOWING BRANDS
AR-15 & M-16 Rifles
Charter Arms Revolvers
HK (Heckler and Koch) Pistols
Ruger Pistols & Revolvers
S&W Pistols and Revolvers
Sig Sauer Pistols
Springfield Armory Pistols
Taurus Pistols & Revolvers
The first of its kind laser for the very popular Bersa Thunder .380 and .380 Plus from LaserLyte®
Ambidextrous, ergonomic switch
Programmable laser, constant or pulse mode
For more information, visit www.laserlyte.com and check us out on Facebook.
LaserLyte® CK-MS Specifications:
Compatible Firearms: Bersa® Thunder .380, .380 Plus
Power Output: Class IIIA, 5mw
Laser module: 650nm
Batteries: two A76 batteries
Battery Life: 5 hrs. constant on, 10 hrs. pulse mode (normal usage*)
Weight .77 ounces/24.00 grams
Length: 2.25 inches/57.24 mm
Width: .69 inches/17.64mm
Height: 1.54 inches/39.22mm
Range at Night: 500 yd., 457.2 m
*Normal usage is defined as one minute on and one minute off. This test mimics actual usage where the unit is turned on and off and the battery is given time to automatically regenerate.
LaserLyte®, the leader in laser technology for over 25 years. Our mission is to heighten the experience of shooting. For additional information about LaserLyte, visit www.laserlyte.com. Keep up to date with LaserLyte on Facebook or Twitter. Visit the LaserLyte YouTube page for all the LaserLyte action.
If you’ve been keeping up with The Walking Dead on AMC, you know how important it is to have a firearm and edged weapon in a Zombie apocalypse. Thanks to LaserLyte and their Zombie Killer Edition Pistol Bayonet you can now have both in a not so small package. With its 2.75” steel blade by Ka-Bar, this bad boy will let you pull off silent taken down maneuvers on the un-dead. And of course there’s the grip/mount in neon green, the unofficial color of Zombie hunters worldwide.
We just ask one thing, if you do decide to to mount one of these on your pistol – please remember to remove it before holstering.
LaserLyte Zombie Killer Edition Pistol Bayonet
- Model Number: ZK PB Serrated – PB-3ZK
- Universal Quick Detachable Design
- Steel Blade by Ka-Bar®
- Fits all medium to large frame pistols with rails
- Full tang design
- Custom polymer sheath included
- Weight 2.6oz
- Blade length 2.75″, Overall length 5.75″